Welcome to LoadSwift International
Number 1 for Building Load Out
The LoadSwift system has its own Beam Hoist that works in combination with our unique rolling platforms capable of lifting loads of up to 2.5 Te or 5500lb. Loads can be picked up as far as 6m ( 18 ft ) from the building edge. This works independently of the tower crane and each LoadSwift system can be tailor made to meet the needs of your project
WHAT ARE THE BENEFITS?
-
Measurable cost savings derived from reduced use of scarce tower crane time and more efficient loading using single high capacity lifts from transport to point of use
-
Loads can be directly lifted from roadside loading bays in ione lift
-
Great flexibility as the system takes just one hour to install and as little as 30 minutes to relocate its own platforms form floor to floor when required
-
Only one vertical section is needed for the building as the platforms can be stacked above each other whilst maintaining the full loading area
-
Improved energy efficiency because the building can be easily closed up at the end of the working day. The rolling platforms retract inside the building within seconds and can then be sealed against rain and snow
|
-
The system can be used in all kinds of weather as the hoist is not impacted by high winds and the platforms are located inside the building when not in use.
-
The platforms are easy to use. They can be pushed / pulled out and into the building by just two operatives
-
The LoadSwift system is extremely safe. It is accredited to BS 2573 and BS 5950 which are above ANSI standards and third party accredited to Australian standards
-
Finally the LoadSwift system can help you to meet increasingly challenging environmental requirements. It produces just 16% of the carbon load of a tower crane.
|
LoadSwift is available for purchase or hire through our dedicated partners.
Latest Updates & News
 |
 |
|
Ben Holt, project manager for Shepherds said:
"The service provided to our site has been very professional and efficient even when complications with crane use has been incurred from our side our guys on site have been very understanding and happy to work with us.
The system itself is ideal for our situation and has worked very well we are impressed by the easy repositioning procedure "
|
Mike King, project manager for VINCI said:
“The Loadswift system is unique and efficient.
The project demanded that we achieve an incredibly tight concrete programme and at the same time pre-load the floors with material for the building envelope and the internal fit out. We would have had to sacrifice considerable hook time from the concrete programme if it were not for the LoadSwift system which was able to function independently to load out the building.
Without the system we could have potentially lost 2 to 4 weeks on the concrete programme alone.”
|
